Cutting fluids might only account for around 5% of your maintenance budget—but they influence up to 40% of your overall maintenance costs. Most workshops treat them as a set-and-forget solution, only addressing issues once the fluid smells off, separates, or becomes visibly dirty.
But by then, the damage is often already done.
Contaminated or worn-out coolant causes premature tool wear, fouls up your machines, and drags down productivity. You end up replacing consumables more often, scheduling reactive maintenance, and copping unexpected downtime. It all adds up—and fast.
Time to Rethink Cutting Fluid
The truth is, most traditional cutting fluids just can’t keep up. Mineral and vegetable-based fluids degrade quickly, become contaminated, and need constant babysitting. They’re prone to foaming, stink when things go bad, and chew through your consumables.
That’s where neo-synthetics come in.
Neo-synthetic cutting fluids—like Excision’s XDP3200 and XDP3800—are built differently. They’re fully water-miscible and use high-performance polymers instead of oils, offering superior sump life, lubricity, and bacterial resistance. No foul smells. No gunky separation. No surprises.
They're also completely clear, which means that you can see your tool during the operation. If you want to be able to see your tool with a water-miscible fluid, you'll need some of these.
Why Switch to Neo-Synthetics?
Excision’s XDP range has been designed from the ground up for high-performance machining environments. You’re not just buying coolant—you’re investing in a cleaner, more efficient operation.
Here’s what you get:
- Extended Tool & Equipment Life – Reduced friction and wear keeps everything running smoother, longer
- Reduced Downtime – Long-lasting fluids mean fewer changeovers and less reactive maintenance
- Lower Maintenance Costs – Less waste, fewer breakdowns, and lower overall fluid consumption
- Consistent Performance – Stable chemistry ensures superior cooling and lubricating power, every day
Synthetic Fluids vs Soluble Fluids
| Benefit | Synthetic Fluids | Soluble Fluids |
|---|---|---|
| Foam Control | Low foaming – perfect for Australia’s soft water | High risk of foaming in soft water |
| Bacteria Resistance | No emulsifiers = fewer bacteria, longer life | Emulsifiers promote bacterial growth |
| Longer Sump Life | 3+ years possible with proper care | Typically lasts 6–12 months |
| Lower Consumption | Reduced drag-out, can run at 3–5% concentration | Higher usage, needs more frequent top-ups |
| Cleaner Machines | Doesn’t separate or smell – keeps sump and shop clean | Can separate and go foul over time |
| Health & Safety | No chlorine or formaldehyde – better for skin & air | Cheaper options often include irritants |
| Mixing & Stability | True solution – stays mixed, even in soft/hard water | Emulsion – can split, needs good mixing |
| Visibility | Milky-white | Clear |
The Switch is Easier Than You Think
Upgrading to Excision’s neo-synthetic coolant isn’t a gamble—it’s a strategic move to future-proof your workshop.
XDP3200 and XDP3800 are engineered for longevity, cleanliness, and performance in Australian conditions. By eliminating mineral oils and switching to water-soluble polymers, you extend sump life, reduce drag-out, and cut down on unnecessary fluid waste.
And with less risk of bacterial growth, you’ll finally say goodbye to foul coolant smells and surprise shutdowns.
Try It Risk-Free: Our 90-Day Satisfaction Guarantee
Still not sure? We get it—changing coolants can feel like a big commitment.
That’s why we back our fluids 100% with our 90-Day Satisfaction Guarantee.
Here’s how it works:
- One of our technicians will recommend a coolant tailored to your machine, process, and material
- You use it according to our recommended mix ratios and parameters
- Give it a proper go—and if after 90 days you’re not happy, we’ll refund the full value and take care of waste coolant disposal at no cost
It’s that simple. No stress. No risk. Just premium coolant that performs—or your money back.
Learn more about starting a 90 day coolant trial.
Don’t Let Your Coolant Hold You Back
You’ve invested in quality machines, skilled staff, and solid processes. Don’t let outdated cutting fluid be the weak link in your operation.
Neo-synthetic coolants are changing the game—offering unmatched cleanliness, longevity, and efficiency. And now, you can try it without any risk.
Get a 90 Day Coolant Satisfaction Guarantee
Our technicians will reccomend the best coolant for your operations - and guarantee your satisfaction.
Learn More
