XDP2100 Semi-Synthetic Coolant - 5L

Product Code: 81211-5

XDP2100 is a high-stability, semi-synthetic cutting fluid made for smooth finishes on aluminium, steel, alloys, and yellow metals. Perfect for hard-water areas, it disperses in nano globules to avoid clumping and deposits. Built with the latest tech, XDP2100 lasts longer and contains no harmful substances, keeping both health and the environment in mind.

Good cooling power
High resistance to foreign oils
Low drag-out
High emulsion stability in hard water
High power corrosion inhibitor

Application

XDP2100 is dispersed in water adding the minimum of 5% concentration. The ideal concentration is determined according to the complexity of the operation and water hardness:

Medium hardness: 6%
Hard water: 8%
Very hard water (> 400 ppm of CaCO3): about 10%

The fluid will generate a layer of salts in the case of working with very extra-hard waters to avoid excessive accumulation of crystals of calcium carbonate. The use of a filter of paper is recommended to remove the salts from the product. The product will be used for machining aluminium, ferrous and yellow metals intended to minimize the drag of coolant per piece.

Security

See Security and Health data sheet.

Performance

Good +
Better ++
Best +++

Type	Semi-Synthetic
Lubrication ⓘ Lubrication is the key to longer tool life. Learn more about lubrication.	+
Drag-Out ⓘ Drag-out is the amount of coolant that sticks on each workpiece that is removed. Learn more about drag-out.	++
Cooling Power ⓘ Heat causes premature wear, fracturing and deforming of the tooling and the workpiece. You need to keep the tool cool. Learn more about cooling.	++
Corrosion Protection	+++
Water Hardness Range ⓘ One of the most common causes of foaming in coolant is soft water. The lower the water hardness, the more likely the coolant is to foam. Learn more about water hardness.	50-300 ppm

Storage

Store in a closed area at temperatures not below 5ºC or above 40ºC
Shelf life: 6 months
Keep the container correctly closed after used to avoid evaporation or contamination

Technical Data Sheet

Safety Data Sheet

Specifications

Appearance	Clear liquid
Colour	Amber
Density (g/ml)	0.99 at 20ºC
Refractive factor	1.81 (Reading º Brix x 1.81 = Concentration)
pH(5%)	9

Product Data

Workpiece Material	P M N S
Cooling Power	Excellent
Corrosion Protection	Excellent
Drag-Out	Excellent
Lubrication	Excellent
Size	5L
Tool Life Performance	Excellent

Not sure how much cutting fluid and water to add to your tank when you top up?

Use the Concentration Calculator

Buy Online

Buy now from our online retailers:

Select your preferred distributor:

Add XDP2100 Semi-Synthetic Coolant - 5L to comparison

View Comparison

Work Material

P Carbon Steels

Great

Good Great Excellent

M Stainless Steels

Great

Good Great Excellent

N Aluminium

Excellent

Good Great Excellent

N Copper

Good

Good Great Excellent

S Titanium

Great

Good Great Excellent

We've got a 90 Day Coolant Satisfaction Guarantee

Our technicians will reccomend the best coolant for your operations - and guarantee your satisfaction.

Learn More

Resources

How Do I Mix My Coolant?

Is your cutting fluid getting smelly? Are there rust spots on your machine? The problem might be how you mix your coolant....

August 2, 2024

Joel Thomas

Article

How to Stop Coolant Foaming in Your CNC Machine

Ever dealt with annoying coolant foam? Let's talk about how water hardness plays into it, and learn about how to tackle this issue...

April 9, 2024

Joel Thomas

Article

The Ultimate Guide To Coolant

Choosing the right coolant for your operations can be challenging. Whether you're sticking with what you know or exploring new options, it's...

March 15, 2024

Connor Urquhart

Guide

How Do I Test The Concentration Level In My Coolant?

Curious about coolant concentration in metalworking? Maintaining the recommended concentration helps prevent corrosion, bacterial issues, and ensures your tools last longer. If you're...

March 5, 2024

Leon Thomas

Guide

How Do I Maintain My Coolant Over Summer?

If your workshop closes over the summer, then you’re likely faced with a problem. How do I maintain my coolant properly while...

December 13, 2023

Aidan Bowker

Article

How Often Should I Change My Coolant?

Contents Section 1: Coolant change frequency Section 2: Factors that shorten coolant lifespan Section 3: Consequences of neglected coolant Section 4: Extending...

November 21, 2023

Leon Thomas

Article

Is My Coolant Dangerous?

Contents Section 1: Why worry Section 2: Coolants are mostly safe Section 3: The potential danger factors Section 4: Stay informed Section...

November 16, 2023

Connor Urquhart

Article

How Much Does Cutting Fluid Cost?

There are a number of factors to consider when looking at the cost of coolant, but you can expect to pay between...

September 15, 2023

Leon Thomas

Article

Does My Coolant Provide The Lubrication That I Need?

Have you ever wondered if your coolant has low lubrication? It's a valid concern, as lubricity is crucial for optimal coolant performance,...

July 31, 2023

Leon Thomas

Article

Why Is My Cutting Fluid Smelly?

If you've ever wondered 'Why does my coolant smell?' then you're not the only one. Bad smelling coolant means something has gone...

July 21, 2023

Connor Urquhart

GuideArticle

Why Should I Use Coolant?

Navigating the world of metal working coolants can be challenging amid the array of options available. However, grasping their fundamental purposes—such as...

March 7, 2022

Leon Thomas

Article

Service & Delivery

How do I purchase my items?

Excision products are available through 300+ local distributors around Australia. Some products may also have buy online options available for online purchase through our distributors.

Find your local distributor

What delivery services do we offer?

We freight out of Melbourne every day for 1-3 days delivery to your local distributor. We also offer upon request (for an extra charge):

Send direct
Air frieght for small urgent items

How do I return an item?

We offer lifetime returns. If you’re unhappy with your purchase, you can return unused items to us for free – no questions asked.

Have a question about this product?

Contact Sales

+61 (03) 5551 4555

Mon - Fri 7am - 5pm

XDP2100 Semi-Synthetic Coolant - 5L

XDP2100 Semi-Synthetic Coolant - 5L

Application

Security

Performance

Storage

Specifications

Work Material

Great

Great

Excellent

Good

Great

We've got a 90 Day Coolant Satisfaction Guarantee

You Might Also Like

Resources

How Do I Mix My Coolant?

How to Stop Coolant Foaming in Your CNC Machine

The Ultimate Guide To Coolant

How Do I Test The Concentration Level In My Coolant?

How Do I Maintain My Coolant Over Summer?

How Often Should I Change My Coolant?

Is My Coolant Dangerous?

How Much Does Cutting Fluid Cost?

Does My Coolant Provide The Lubrication That I Need?

Why Is My Cutting Fluid Smelly?

Why Should I Use Coolant?

Service & Delivery

How do I purchase my items?

What delivery services do we offer?

How do I return an item?

Have a question about this product?