(D1303) HSS Centre Drill / Form A (60°)
Bright-Finish Form A 60° CenteringCode: D1303005
-
Key Features
- HSS Form A centre drill with 60° geometry
- Bright finish
- Drill diameters from 0.5 mm to 10.0 mm
Made in South Korea
Defined centre geometry
Form A construction with a 60° point geometry supports consistent centre-drilling selection.
Useful size coverage
Drill diameters from 0.5 mm to 10.0 mm cover compact through larger centre-drill requirements.
Clear dimensional selection
Specified pilot, shank and overall lengths simplify choosing the appropriate D1303 size.
| SKU | Drill Diameter (mm) | Overall length (mm) | Shank dia. (mm) | Stock | Price | Qty | Add |
|---|---|---|---|---|---|---|---|
| D1303005 | 0.5 | 25.0 | 3.15 | 5 days | $12.00 | ||
| D1303008 | 0.8 | 25.0 | 3.15 | 5 days | $12.00 | ||
| D1303010 | 1.0 | 31.5 | 3.15 | 5 days | $9.20 | ||
| D1303912 | 1.25 | 31.5 | 3.15 | 5 days | $9.20 | ||
| D1303016 | 1.6 | 35.5 | 4.0 | 5 days | $9.20 | ||
| D1303020 | 2.0 | 40.0 | 5.0 | 5 days | $9.90 | ||
| D1303025 | 2.5 | 45.0 | 6.3 | 5 days | $10.80 | ||
| D1303931 | 3.15 | 50.0 | 8.0 | 5 days | $11.30 | ||
| D1303040 | 4.0 | 56.0 | 10.0 | 5 days | $15.40 | ||
| D1303063 | 6.3 | 71.0 | 16.0 | 5 days | $32.70 | ||
| D1303080 | 8.0 | 80.0 | 20.0 | Low stock | $74.60 | ||
| D1303100 | 10 | 100.0 | 25.0 | In stock | $97.20 |
Add (D1303) HSS Centre Drill / Form A (60°) to comparison
View Comparison- Overview
- Specifications
- Reviews
YG-1 D1303 HSS Centre Drills are bright-finish Form A tools with a 60° point geometry. They provide centre-drilling capability with drill diameters from 0.5 mm through to 10.0 mm. The range offers a practical selection for matching the required centre-drill diameter. Smaller 0.5 mm and 0.8 mm sizes use single-end construction.
Pilot lengths span 0.8 mm to 12.8 mm throughout the listed series. Shank diameters extend from 3.15 mm to 25 mm through the range. Overall lengths run from 25 mm to 100 mm across this D1303 range. Each listed size specifies a corresponding shank diameter, pilot length and overall length.
- HSS Form A centre drill with 60° geometry
- Bright finish
- Drill diameters from 0.5 mm to 10.0 mm
- Single-end construction on 0.5 mm and 0.8 mm sizes
- Pilot lengths from 0.8 mm to 12.8 mm
- Overall lengths from 25 mm to 100 mm
No specifications available.
